BB Drag Race Kits - ACP Headers

Go to content
                  
                                        BB Drag Race Kits











Model #227 BB Pro Gas 2.0
 (designed on a Bickle/Haas chassis)
Kit Form Only
2 1/8"
2 1/4"
$550.00 - with Weld-On Collectors
Slip-On Collectors + $100.00



Model #228 BB Pro Gas 1.0
    (designed on an Alston chassis)
Kit Form Only
2"
2 1/8"
2 1/4"
$500.00 - with Weld-On Collectors
Slip-On Collectors + $100.00



1.  Make sure the vehicle is on flat, level ground.
2.  Measure the distance from the bottom of the frame rail (at driver's seat) to the ground.
3.  Measure the distance from the crank centerline to the ground.
4.  Use the formula below to determine the appropriate model.
Formula:  If the distance from the frame rail to ground is more than 3-1/2", subtract 3-1/2"
from your measurement.



            Model #230 1.2
(11.5 adjusted crank center height-see below)
Kit Form Only
2"
2 1/8"
2 1/4"
$550.00 - with Weld-On Collectors
Slip-On Collectors + $100.00







Model #287 Roadster Altered
Kit Form Only
2"
2 1/8"
2 1/4"
$550.00 - with Weld-On Collectors
Slip-On Collectors + $100.00


Back to content